The GEMORE new dual channel digital COMBO is the new technology which include both TENS and EMS (NMES) functions. It with Compliance meter that can store the treatment time used by the patients. Not only can set parameters accurately but also operate easily by six keys with LCD display by prescription for patients' condition. This device has a large liquid crystal display and press buttons, which is helpful for the people who can easily set the parameters. The LCD can show Width, Rate, Mode, CH1/2 and Timer at the same time during TENS function. The LCD show Rate, one of ON, Ramp, OFF time by turn, Mode, CH1/2 and Timer at the same time during EMS function.

Channel: Dual, isolated between channels
Pulse Amplitude: 0-80mA into 500 ohm load.
Pulse Rate: Adjustable,from 1Hz ~ 160 Hz,1 Hz/step(1-20Hz),5Hz/step(20-160Hz)
Pulse Width: TENS : Adjustable, from 50 μ S ~ 260 μ S, 10 μ S/step,
　　　　　　　 EMS: 250 μ S fixed。
TENS Mode: B, C, M, SDR, SDW
EMS Mode: S/C/A (Synchronous/ Continue/ Alternation)
EMS ON (1- 30 sec), Ramp (1-8 sec), OFF time(1-30sec) adjustable
Wave Form: Asymmetrical Bi-Phasic Square Pulse
Timer: 15,30,60 min or Continue
Constant current
Software ramp up for mode change
Patient compliance meter
Patient Lock system
Six keys: Accurate and Easily parameter setting
Low battery indicator
Power consumption is very small after timer off
Power saving is good than others
Power : DC 9V battery
Size: 108(H)× 61.5(W) × 25(T) mm
Weight: Approx. 140gm (include battery)
Tolerance: +/-10%